Roasted topside beef recipe | Jamie Oliver recipes (2024)

FAQs

Roasted topside beef recipe | Jamie Oliver recipes? ›

First 25% of the cooking time should be at 240°c /475°f Gas Mark 9 then reduced to 160°c /325°f / Gas mark 3 for the rest of the cooking time. Fillets or thin pieces of meat reduce by a few min per kg. 14 minutes per lb.

First 25% of the cooking time should be at 240°c /475°f Gas Mark 9 then reduced to 160°c /325°f / Gas mark 3 for the rest of the cooking time. Fillets or thin pieces of meat reduce by a few min per kg. 14 minutes per lb.

Cook the beef covered with foil- this stops the outside from cooking faster than the inside and keeps moisture locked into the meat. Basting- halfway through the cooking time, baste the beef using the liquid from the bottom of the tray.

Topside of beef is a large, lean cut. Both topside and silverside are taken from the hind quarter of the animal, between the rump and leg. The topside muscle, being both lean and quite tender, makes an excellent roasting joint.

Also note that the topside is best served no more than medium rare because it dries out very easily. I finish the roast uncovered for the last halfhour. A better bet than topside for the same price is probably bolar blade because while it can have a bit of gristle it is softer and more tender.

Pot-roasting topside is a great idea because it means slow-cooking the joint in stock, eliminating any toughness in the meat, and the all-in-one method, usually in a cast iron casserole, means less washing-up. Sit the meat on the veg with herbs and aromatics, and try adding wine to the stock before pouring it over.

Because it's naturally tough, Topside beef steaks are more often not tenderised or pounded using a tenderiser. Once gone through this process, you're left with a thin slice of meat! Be sure to either bake or pan-fry!

When roasting meat and poultry, set the oven temperature to 325°F (163°C) or higher. Explore the charts below to learn how to get great results every time you cook.

Taken from the hindquarter of the cow beneath the rump, topside of beef is a cost-effective roasting joint packed with flavour. It's a common sight at the table when it comes to a Sunday roast, but tastes equally delicious as a cold cut.

You should cover a beef roast with kitchen foil for at least part of the cooking time. This stops the roast beef from drying out too much during cooking.

What is topside beef called in the US? ›

Topside of beef (or Top Round as it is known in the US) is sometimes called the poor man's sirloin, a lean cut of beef from the cow's thigh (the rump). It is usually sold boned, rolled and tied, ready for oven roasting.

Topside: Topside of beef is a lean boneless cut from the top of the inside hind leg, also called buttock steak. Topside is ideal for roasting as well as cold cuts and makes delicious spiced beef.

For roasts, the best cuts include rib (on the bone or boned and rolled), sirloin, top rump and fillet. For quick cooking, try fillet, entrecôte, rib eye, sirloin or rump steaks. Brisket, topside and silverside are good for pot roasts, and stewing and braising steak are good for stews and casseroles.

The bottom round roast, taken from the round primal, is one of the tougher cuts of roast that's known for being very lean. Like the rump roast, this beef cut is best prepared by braising or slow-cooking.

While both are large, tough cuts of budget-friendly beef, the main difference that sets these two roasts apart is where on the animal they're cut from. Top round roast is cut from the rear leg and is more lean than chuck roast, which is cut from the shoulder and contains more fat.

We recommend a temperature of 195-200 °F / 90-93 °C for a tender and juicy roast. Serve: Remove the bay leaves and rosemary sprigs. Blend some of the celery, carrots and onion with some of the juices until you have a smooth puree. Spoon some of the puree sauce on each serving plate and top with the roast.

While you're waiting, preheat your oven to the recommended temperature. You'll notice our chart selects low to moderate heat, in the range of 325 or 350 degrees, for larger roasts and higher heat, above 400 degrees, for smaller, tender roasts to produce the best results.

While both are large, tough cuts of budget-friendly beef, the main difference that sets these two roasts apart is where on the animal they're cut from. Top round roast is cut from the rear leg and is more lean than chuck roast, which is cut from the shoulder and contains more fat.